Swing STING RS RS PPG

Swing STING RS PPG – Cross-Country Comfort Meets PPG Power

The Swing STING RS PPG is your all-in-one solution for powered paragliding, combining comfort, precision, and effortless control. Whether you’re venturing into paramotoring for the first time or you’re a seasoned explorer seeking smoother launches and more efficient glides, the STING RS PPG brings innovation directly to your wing. Not only does it adapt seamlessly to both free flying and PPG conditions, but it also keeps every flight incredibly accessible.

Since it integrates RAST technology, this wing enhances internal pressure control. Therefore, pilots enjoy consistent canopy behavior even in turbulent air. Consequently, intuitive handling boosts confidence from takeoff to landing.

✨ STING RS PPG Designed for Dual-Purpose Use

Versatility for Free Flight and Powered Adventure

With its hybrid certification and specially tuned profile, the STING RS PPG bridges the gap between unpowered and powered paragliding. Therefore, it offers the best of both worlds. Whether climbing in thermals or cruising with your motor, it responds with agility and balance.

Thanks to the reinforced design and profile, this wing delivers dependable performance under load. Additionally, pilots benefit from an extended weight range. Thus, flying with heavier paramotoring equipment feels secure and responsive.

STING RS PPG Enhanced Stability, Effortless Control

Although it’s built to handle power, the Swing STING RS PPG stays incredibly light in feel. Because of its precise brake input response, pilots can enjoy tight, controlled turns while still relaxing on long flights. Moreover, this wing becomes a great choice for both leisure pilots and advanced adventurers alike.

Furthermore, pitch stability helps eliminate uncomfortable oscillations. Since the wing remains exceptionally well-balanced, it allows for smoother transitions and less fatigue—ideal for extended cross-country journeys.

🌟 Key Features of the Swing STING RS PPG

• Hybrid Design for Free and Powered Flight – Flexible, adaptive wing profile
• RAST Technology – Improves stability and canopy control in turbulence
• Extended Weight Range – Accommodates paramotor gear without compromise
• Smooth Takeoff Behavior – Reliable inflation and launch characteristics
• Precise Brake Geometry – Offers sharp handling with minimal effort
• Inclusive Pilot Focus – Ideal for newcomers and experienced fliers
• Certified in EN-B Class – Safety-focused design without sacrificing performance
• Lightweight Yet Durable Build – Built for adventure, easy to transport

🚀 STING RS PPG For Every Level of Powered Pilot

Ideal First Wing with Room to Grow

Since it provides a stable yet responsive flight platform, the STING RS PPG proves perfect for beginners transitioning into powered paragliding. Not only does it offer predictable behavior, but it also evolves with the pilot’s skill level. Furthermore, advanced pilots will appreciate its dynamic turning and confident glide in diverse air conditions.

STING RS PPG Efficient for Cross-Country Touring

Because cross-country pilots require reliability and endurance, this wing delivers both. The aerodynamic profile allows for reduced fuel consumption. Additionally, with reduced brake pressure, long flights feel less taxing. Meanwhile, the balance of glide and sink rate supports covering more distance with less effort.

🌈 A Wing That Empowers Every Pilot

The Swing STING RS PPG isn’t just about performance—it’s about accessibility. Everyone deserves to experience the thrill of powered flight, and this wing makes that dream attainable. Whether flying for freedom or training for your next adventure, it meets your needs with precision and comfort.

Because it combines technology, ease of use, and thoughtful design, the STING RS PPG sets a new benchmark. Therefore, take to the skies with confidence. The Swing STING RS PPG is ready when you are.

Swing STING RS RS PPG Paraglider… just fly!

Simply take an evening flight around and over your own home. Climb to the clouds after take-off in the flatlands and enjoy a serene glide with the engine switched off – the STING RS makes your dreams come true!

The STING RS is a comfortable and simple dual-purpose ppg-glider, that will accompany your flying career from the first training lessons to a licensed recreational/XC pilot.

The STING RS is primarily made for foot launch.

But the STING RS also cuts a great figure, whether you’re on holiday in the mountains or on the coast, due to its excellent free flight characteristics. Combine this with its certification level and the Sting RS will afford you a safe introduction to thermal flying or coastal soaring.

With RAST, the air equalisation flows within the paraglider canopy can be regulated through defined openings. This applies both when filling,(during take-off) and when emptying. In the case of pressure loss, e.g. caused by canopy collapse in turbulent air, the relative internal pressure of the CORE section increases, while the BUFFER section absorbs the introduced energy by deformation. Furthermore, RAST can be used as an additional support to the leading and trailing edge, which has a positive effect on flight comfort. As RAST connects the ribs over the entire profile height, the construction has a stiffening effect and reinforcements and/or stiffening elements can be saved or even completely replaced by this special construction method.

The well-proven RAST-System is of course part of the STING RS inner structure.

It gives the STING RS the addition of stability and control and is responsible for its unique and comfortable RAST-feeling during takeoff and flight. The patented bulkhead partition with its valves helps to prevent big collapses and deformations, hence reducing the risk of uncontrolled flight patterns.

 

It takes just a few quick steps to limit speed system travel, turning the STING RS into an A category glider that is suitable for learners. When training has been completed, it is just as easy to remove the limiter and enjoy the performance benefits of the B category. Ball-bearing pulleys make even the longest glide stages a breeze.

Nitinol wires – for maximum profile stability and excellent starting behavior

Nitinol is a high-strength, temperature- and corrosion-resistant shape memory alloy. The name Nitinol is an acronym for Nickel Titanium Naval Ordnance Laboratory.

This material is well-known in medical technology, and for a long time Swing has been using it as leading edge reinforcement in paraglider design, one of the first paraglider manufacturers to do so. For the STING RS, the Nitinol reinforcements are inserted into nylon tubes. This meant that the cross-sectional area (and thus the contact area for the top surface material) could be increased without having to forego the positive features of the memory alloy (bend-resistance, length and dimensional stability).

Mini ribs – for a smooth trailing edge

Ballooning on the trailing edge has a considerable influence on a paraglider’s control pressure and handling. That’s why, with the STING RS, ballooning in this area was reduced to a minimum using 3D shaping, in addition to the tried and tested mini ribs. The trick here is that the mini ribs have internal stitching on the top surface so that none of the threads can get caught up on the ground and pulled out, even when launching in difficult terrain.

3D-shaping – for optimised aerodynamics

The targeted control of tension by 3D shaping at the leading edge of the upper sail has become standard in paraglider construction. This is in order to make the airflow-relevant areas as crease-free as possible. Depending on the model, 3D shaping is either single or double in its construction.

We have supplemented the standard shaping with another 3D shaping at the leading edge to optimise the aerodynamic effect of the miniribs.

Simple line concept – for good sortability

To ensure ease of organisation of the lines and to keep the riser as clear as possible, all line galleries from the sail are combined on only three riser levels.

An intelligent line mix of state-of-the-art materials guarantees durability and length stability with minimal drag.

STING RS PPG Hybrid paramotor risers – with trimmer locking system for free flight

The riser of the STING RS is equipped with trimmers as standard to increase the cruising speed during powered flight and to be able to compensate for the counter-torque of the motor.

With the trimmers locked, the STING RS is also suitable for engine-less flight and is type-approved for it.

STING RS PPG Colors

Fire

Fluid

Energy

List of materials

Description	Article Code	Material	Dimensions	Surface	Manufacturer
Quick links	MRDI03.5	Inox	ø 3,5mm	stainless steel	Techtex
D-ring	SRI03.5 8.22	Inox	ø 3,5mm	stainless steel	Techtex
Rigging line(main)	7950-300/-190 7343-230/-190	Dyneema Tecnora	ø 1,7mm / 1,5mm ø 1,7mm / 1,5mm	covered	Edelrid
Rigging line (intermediate)	7950-190 7343-140	Dyneema Tecnora	ø 1,5mm ø 1,3mm	covered	Edelrid
Rigging line (top)	DSL070	Dyneema	ø 0,9mm	uncovered	Edelrid
Fabric topsail	9017 E25	Nylon	38g/m² 31g/m² 28g/m²	coated	Porcher Sport
Fabric bottomsail	9017 E25	Nylon	38g/m² 31g/m² 28g/m²	coated	Porcher Sport
Fabric ribs	WT2042	Nylon	32g/m²	coated	Techtex
Riser webbing	20mm BLK	Polyester	20mm / 2mm	—	Güth & Wolf
Profile support	Support rod	Nitinol Nylon	ø 1,0mm / 0,8mm tubecover	—	Techtex
Brake lines	DFSL200 DSL70	Dyneema	ø 1,9mm ø 0,8mm	covered/ uncovered	Liros